SF-82 NEUTRAL TRANSPARENT SILICONE SEALANT
详细说明

SF-82 NEUTRAL TRANSPARENT SILICONE SEALANT | ||
Specifications | Value | |
Composition | Neutral Curing | |
Density | g/cm³ | 1.1±0.01 |
Skin Formation time at 23°C / 50% RH | Minutes | 12 |
Curing Rate | mm/24 hours | 1.8 |
Hardness (Shore A) | 32 | |
Tensile Strength | MPa | 0.9 |
Ultimate Elongation | % | 280 |
Modulus at 100% Elongation | MPa | 0.42 |
Sag | mm | 0 |
Volatile Organic Content (VOC) | % | 6.5 |
Elastic recovery | % | 90 |
Ultraviolet resistance | Yes | |
Can be painted over | No | |
Anti-Fungus & Anti-Bacterial | No |
Using Instructions:
1. Clean the surface that needs adhesion with acetone or other solvents.
2. Paste masking tape on joint outer sides as protection, trim and remove the masking tape before curing.
3. Users must do local tests on the compatible adhesion; ensure good adhesion between products and panels.
4.Our company is not responsible for any accidental loss.
Precautions:
1. Not suitable for materials with greasy and wet surfaces, airless place, temperature below 4°C or above 40°C.
2. Not used as structural sealant.
Safety Instruction:
1. Use in well ventilated areas.
2. In case of eye contact, flush with water and seek medical attention immediately.
3. Keep out of the reach of children.
Storage:
Should be stored separately in cool and dry places, temperature below 27℃.
12 months shelf life from the date of production.
Transport:
Transported as unhazardous products.
Standards:GB/T 14683-2017, EN 15434:2006+A1:2010
Color:Transparent
Packing:
Capacity: 280ml, 300ml, 600ml or Customize.
Outer Packing Size:29X20X24CM, 29X20X24CM, 37X20X24CM
previous item: SF-85 NEUTRAL SILICONE SEALANT FOR DOORS AND WINDOWS
next item: SF-89 NEUTRAL SILICONE SEALANT SPECIALIZED FOR MIRROR