SF-56 STRUCTURAL SILICONE SEALANT
详细说明

SF-56 Structural Silicone Sealant | ||
Specifications | Valu | |
Composition | Neutral Curing | |
Density | g/cm³ | 1.36±0.01 |
Skin Formation time at 23°C / 50% RH | Minutes | 45 |
Curing Rate | mm/24 hours | 2 |
Hardness (Shore A) | 42 | |
Tensile Strength | MPa | 1.35 |
Ultimate Elongation | % | 275 |
Modulus at 100% Elongation | MPa | 0.7 |
Sag | mm | 0 |
Application Temperature | °C | +4 to +40 |
Temperature Resistance | °C | -40 to +180 |
Volatile Organic Content (VOC) | % | 2.9 |
Ultraviolet resistance | Yes | |
Can be painted over | No | |
Anti-Fungus & Anti-Bacterial | No |
Using Instructions:
1. Clean the surface where you will stick with acetone or other solvent.
2. Paste masking tape on the place that needs protection; Remove the masking tape before the sealant starts curing.
3. Product applicability should be confirmed in user's sole judgment. Please do the compatibility test before official use to make sure that it can stick well with the surface.
4.Clean up uncured sealant with cloth or solvent such as turpentine;remove excessive solidified sealant with sharp knife.
Precautions:
Not suitable for matenals with greasy and wet surfaces, airless place, temperature below 4℃ or above 40℃.
Safety Instruction:
1. Use in well ventilated areas.
2. In case of eye contact, flush with water and seek medical attention immediately.
3. Keep out of the reach of children.
Storage:
Should be stored separately in cool and dry places, temperature below 27℃.
12 months shelf life from the date of production.
Transport:
Transported as unhazardous products
Standards:GB/T 16776-2005, EN 15434:2006+A1:2010
Color:White, Grey, Black or Customize
Packing:
Capacity: 280ml, 300ml, 600ml or Customize.
Packing Qty: 24PCS/CTN, 24PCS/CTN, 20PCS/CTN
Outer Packing Size:29X20X24CM, 29X20X24CM, 37X20X24CM
previous item: SF-58 STRUCTURAL SILICONE SEALANT *PROFESSIONAL*
next item: SF-5000 DOUBLE-COMPONENT STRUCTURAL SILICONE SEALANT